WORLD FIRST
Predictive Wheel Truing
Enabled by dynamic spoke tension measurement.
Complete Wheel Reading
10 s
Side-to-side • Up-and-down • Offset • Spoke tension
12×
FASTER
than conventional wheel measurement methods, which take approximately 2 minutes.
±10 KGF
TOLERANCE RANGE
around the target spoke tension defined by the user.
100%
TRACEABILITY
All wheel data is recorded and available through our WPA solution.
Why Predictive Wheel Truing Changes the Game
Spoke tension measurement has always been primarily used as a quality control step performed once the wheel is finished.
Bikebotix changes this approach. Dynamic spoke tension measurement is no longer used only to inspect the wheel. It now makes it possible to automatically calculate the most relevant corrections before they are applied.
This predictive process acts on all wheel deviations: side-to-side, up-and-down, offset and spoke tension. The actions required to correct the wheel are calculated to achieve the tolerances defined by the user.
READ. PREDICT. CORRECT.
READ
The machine performs a complete reading of the rotating wheel: side-to-side, up-and-down, offset and spoke tension.
PREDICT
Based on the measured data, the machine automatically calculates the most relevant corrections.
CORRECT
The machine applies only the actions required to achieve the defined tolerances.
Concrete Benefits for Production
Predictive wheel truing optimizes the corrections applied to the wheel. By limiting unnecessary actions, the machine reduces stress on nipples and spokes while helping to preserve components.
This approach also saves time and improves result reliability while ensuring the final quality of the wheel.
Dynamic Spoke Tension Measurement
Spoke tension is measured while the wheel is rotating, without stopping at each spoke.
Predictive Wheel Truing
Corrections are automatically calculated using the wheel’s actual measured data.
Final Validation
A second measurement validates that the wheel is within the ±10 KGF tolerance range around the target spoke tension.
Complete Traceability
All wheel data is recorded and available through our WPA – Workshop Production Analysis solution.
A Technology Designed for the Cycling Industry
Through our WPA solution, complete wheel data is stored, traceable and available for analysis. Manufacturers can monitor production, analyze workshop performance and improve wheel quality over time.
This technology directly addresses the needs of wheel manufacturers: speed, precision, reliability, traceability and fewer unnecessary actions on components.
Presented at EUROBIKE 2026
This technology was unveiled for the first time at EUROBIKE 2026. Throughout the event, visitors to the Bikebotix booth attended live demonstrations and discovered this new generation of automated wheel building.
See the Machine in Action
Watch the machine in operation on our Instagram account.
Watch the Instagram ReelDiscover This Innovation
By integrating dynamic spoke tension measurement directly into the correction process, Bikebotix introduces a new generation of automated wheel building.
A technology designed to deliver greater precision, greater speed and reliable final wheel quality.
Would you like to learn more about this technology or tell us about your project?
Our team is available to listen to your needs, answer your questions and explore with you the possibilities offered by this innovation and the benefits it can bring to your production.